Houdini 20.5 Nodes Dynamics nodes

POP Location dynamics node

A POP solver that generates particles at a point.

On this page
Since 13.0

POP Location node generates particles for particle simulations. Additional POP nodes can be wired after it and will implicitly only affect particles created by this node.

Using Location

To...Do this

Place Emitter anywhere in the scene

  1. Click the Location tool on the Particles tab.

  2. Move the cursor into the scene view. You can hold ⇧ Shift to move off the construction plane.

  3. Click to place the particle system anywhere in the scene view and press Enter to confirm your selection.

If you press Enter without clicking, Houdini places the emitter at the origin.

  1. Click play to see the particles.

Place Emitter at the origin

Press ⌃ Ctrl + on the Location tool on the shelf.

Parameters

Position

Location in space to emit particles from.

Birth

This operator has two methods for emitting particles. You can use these methods together or separately:

  • Impulse creates a certain number of particles each time the node cooks.

  • Constant creates a certain number of particles per second.

Impulse Activation

Turns impulse emission on and off. Impulse emits the number of particles in the Impulse Birth Rate below each time the operator cooks. A value of 0 means off, any other value means on.

Impulse Count

Number of particles to emit each time the node cooks (when Impulse activation is on).

Const. Activation

Turns constant emission on and off. Impulse emits the number of particles in the Constant birth rate below each second. A value of 0 means off, any other value means on.

Const. Birth Rate

Number of particles to emit per second (when Constant Activation is on).

Just Born Group

Name of a group to put the new points into. The particles will only be in this group the same substep that they were created.

Life Expectancy

How long the particle will live (in seconds).

Life Variance

Particles will live the number of seconds in Life Expectancy, plus or minus this number of seconds. Use 0 for no variance.

Jitter Birth Time

Rather than have the particles all be created with an age of 0, they are created with a random age within the current timestep. They will also be moved by their starting velocity times this age. This is useful when adding high velocity particles from emitters as it won’t generate clumps on each frame.

Interpolate Source

The source can also be interpolated linearly to better birth particles from fast moving sources. This uses the Jitter Birth Time to decide where in the source to interpolate. If you are wiring your source into the post solve, the Positive birth time and Backwards source should be used, which is useful since it does not require future knowledge of the source. However, to avoid clumping when large forces are present, you should use Negative birth time and Forward source. This requires you to delete all particles with negative age when rendering. Alternatively, you can wire into the Pre-Solve, and then use the Forward source with Negative birth time and not have to worry about seeing particles with negative age. However, this requires a source that you can compute outside the simulation.

Interpolation Method

The Interpolate Source takes two geometries and has to find a way to determine the in-between values of those geometries. If point counts and polygons match, the Match Topology option can be used for the most accurate result. Otherwise, point velocities may be computed with the Trail SOP and then Use Point Velocities selected. In this latter case, only one of the input geometries is needed, but the Forward and Backwards options are still used to determine if the born points lead or trail the object.

Attributes

The parameters on this tab let you control which and how attributes are initialized on the emitted particles.

Velocity

Set or add to velocity attribute.

Variance

Variance to velocity set above. The node will add +/- from 0 to this number along each axis to the Velocity parameter.

Ellipsoid Distribution

By default, the variance (if any) is distributed in a box, the size of which is determined by the Variance parameter. When this option is on, the variance is distributed in an ellipsoid instead.

Add ID Attributes

Add ID and parent attributes to the created particles.

Stream

Stream Name

The name of the stream to be generated by this generator. This value is prefixed with stream_ to form a group name that all particles that belong to this logical stream will be made part of.

Inputs

Outputs

First Output

The output of this node should be wired into a solver chain.

Merge nodes can be used to combine multiple solver chains.

The final wiring should go into one of the purple inputs of a full-solver, such as POP Solver or FLIP Solver.

Locals

channelname

This DOP node defines a local variable for each channel and parameter on the Data Options page, with the same name as the channel. So for example, the node may have channels for Position (positionx, positiony, positionz) and a parameter for an object name (objectname).

Then there will also be local variables with the names positionx, positiony, positionz, and objectname. These variables will evaluate to the previous value for that parameter.

This previous value is always stored as part of the data attached to the object being processed. This is essentially a shortcut for a dopfield expression like:

dopfield($DOPNET, $OBJID, dataName, "Options", 0, channelname)

If the data does not already exist, then a value of zero or an empty string will be returned.

DATACT

This value is the simulation time (see variable ST) at which the current data was created. This value may not be the same as the current simulation time if this node is modifying existing data, rather than creating new data.

DATACF

This value is the simulation frame (see variable SF) at which the current data was created. This value may not be the same as the current simulation frame if this node is modifying existing data, rather than creating new data.

RELNAME

This value will be set only when data is being attached to a relationship (such as when Constraint Anchor DOP is connected to the second, third, of fourth inputs of a Constraint DOP).

In this case, this value is set to the name of the relationship to which the data is being attached.

RELOBJIDS

This value will be set only when data is being attached to a relationship (such as when Constraint Anchor DOP is connected to the second, third, of fourth inputs of a Constraint DOP).

In this case, this value is set to a string that is a space separated list of the object identifiers for all the Affected Objects of the relationship to which the data is being attached.

RELOBJNAMES

This value will be set only when data is being attached to a relationship (such as when Constraint Anchor DOP is connected to the second, third, of fourth inputs of a Constraint DOP).

In this case, this value is set to a string that is a space separated list of the names of all the Affected Objects of the relationship to which the data is being attached.

RELAFFOBJIDS

This value will be set only when data is being attached to a relationship (such as when Constraint Anchor DOP is connected to the second, third, of fourth inputs of a Constraint DOP).

In this case, this value is set to a string that is a space separated list of the object identifiers for all the Affector Objects of the relationship to which the data is being attached.

RELAFFOBJNAMES

This value will be set only when data is being attached to a relationship (such as when Constraint Anchor DOP is connected to the second, third, of fourth inputs of a Constraint DOP).

In this case, this value is set to a string that is a space separated list of the names of all the Affector Objects of the relationship to which the data is being attached.

ST

The simulation time for which the node is being evaluated.

Depending on the settings of the DOP Network Offset Time and Scale Time parameters, this value may not be equal to the current Houdini time represented by the variable T.

ST is guaranteed to have a value of zero at the start of a simulation, so when testing for the first timestep of a simulation, it is best to use a test like $ST == 0, rather than $T == 0 or $FF == 1.

SF

The simulation frame (or more accurately, the simulation time step number) for which the node is being evaluated.

Depending on the settings of the DOP Network parameters, this value may not be equal to the current Houdini frame number represented by the variable F. Instead, it is equal to the simulation time (ST) divided by the simulation timestep size (TIMESTEP).

TIMESTEP

The size of a simulation timestep. This value is useful for scaling values that are expressed in units per second, but are applied on each timestep.

SFPS

The inverse of the TIMESTEP value. It is the number of timesteps per second of simulation time.

SNOBJ

The number of objects in the simulation. For nodes that create objects such as the Empty Object DOP, SNOBJ increases for each object that is evaluated.

A good way to guarantee unique object names is to use an expression like object_$SNOBJ.

NOBJ

The number of objects that are evaluated by the current node during this timestep. This value is often different from SNOBJ, as many nodes do not process all the objects in a simulation.

NOBJ may return 0 if the node does not process each object sequentially (such as the Group DOP).

OBJ

The index of the specific object being processed by the node. This value always runs from zero to NOBJ-1 in a given timestep. It does not identify the current object within the simulation like OBJID or OBJNAME; it only identifies the object’s position in the current order of processing.

This value is useful for generating a random number for each object, or simply splitting the objects into two or more groups to be processed in different ways. This value is -1 if the node does not process objects sequentially (such as the Group DOP).

OBJID

The unique identifier for the object being processed. Every object is assigned an integer value that is unique among all objects in the simulation for all time. Even if an object is deleted, its identifier is never reused. This is very useful in situations where each object needs to be treated differently, for example, to produce a unique random number for each object.

This value is also the best way to look up information on an object using the dopfield expression function.

OBJID is -1 if the node does not process objects sequentially (such as the Group DOP).

ALLOBJIDS

This string contains a space-separated list of the unique object identifiers for every object being processed by the current node.

ALLOBJNAMES

This string contains a space-separated list of the names of every object being processed by the current node.

OBJCT

The simulation time (see variable ST) at which the current object was created.

To check if an object was created on the current timestep, the expression $ST == $OBJCT should always be used.

This value is zero if the node does not process objects sequentially (such as the Group DOP).

OBJCF

The simulation frame (see variable SF) at which the current object was created. It is equivalent to using the dopsttoframe expression on the OBJCT variable.

This value is zero if the node does not process objects sequentially (such as the Group DOP).

OBJNAME

A string value containing the name of the object being processed.

Object names are not guaranteed to be unique within a simulation. However, if you name your objects carefully so that they are unique, the object name can be a much easier way to identify an object than the unique object identifier, OBJID.

The object name can also be used to treat a number of similar objects (with the same name) as a virtual group. If there are 20 objects named “myobject”, specifying strcmp($OBJNAME, "myobject") == 0 in the activation field of a DOP will cause that DOP to operate on only those 20 objects.

This value is the empty string if the node does not process objects sequentially (such as the Group DOP).

DOPNET

A string value containing the full path of the current DOP network. This value is most useful in DOP subnet digital assets where you want to know the path to the DOP network that contains the node.

Note

Most dynamics nodes have local variables with the same names as the node’s parameters. For example, in a Position DOP, you could write the expression:

$tx + 0.1

…to make the object move 0.1 units along the X axis at each timestep.

Dynamics nodes