rig::ParentBlend

Creates a dynamic path that represents the motion of a TransformObject by sampling the translate, rotate, and scale parameters from an animation stack.

dynamicpath::LoadFromArray

Creates a dynamic path from arrays of positions, times, and source times.

dynamicpath::LoadFromChannels

Creates a dynamic path by sampling a set of X, Y, and Z channels.

dynamicpath::LoadFromGeometry

Loads a dynamic path from the geometric representation of a dynamic path.

dynamicpath::LoadFromGraph

Constructs dynamic paths by evaluating Matrix4 outputs of a graph over time.

dynamicpath::LoadFromGraphChannels

Constructs dynamic paths by building a parameter dictionary for a graph from a channel collection, and evaluating Matrix4 outputs of the graph over time.

dynamicpath::ProjectileLifeFromPlane

Computes the life of a projectile arc based on the start position, end position, and maximum height of the projectile in a given direction.

dynamicpath::ProjectilePathEvaluatePeak

Determines the peak of a projectile path.

dynamicpath::ProjectilePathFromLife

Creates a dynamic path representing the arc of a projectile that is launched between two positions in a specific amount of time.

dynamicpath::ProjectilePathFromPlane

Creates a dynamic path representing the arc of a projectile that is launched between two positions while skimming a height plane.

dynamicpath::ProjectilePathFromSpeed

Creates a dynamic path representing the arc of a projectile that is launched between two positions with a specific initial speed.

dynamicpath::WriteToGeometry

Creates a geometry from a dynamic path.

fbik::GetBoneTransform

Gets the transform of a bone in an FBIK skeleton by name.

fbik::PhysIKSolver

Creates a PhysIKSolver from a FBIK skeleton.

fbik::SetComTarget

Sets the center of mass target on an FBIK solver.

fbik::SetSkeleton

Sets the skeleton on an FBIK solver.

fbik::SetTarget

Set a target on an FBIK solver with a bone name.

fbik::SetTargets

Sets multiple targets on an FBIK solver.

fbik::SetTargetsFromDict

Sets targets on an FBIK solver from a Dict.

fbik::SkeletonFromGeo

Gets a FBIK skeleton stored in geometry.

fbik::SkeletonUpdateGeo

Update geometry according to an FBIK skeleton.

fbik::SolvePhysIK

Solves an FBIK skeleton using using a solver.

fbik::Target

Creates a FBIK skeleton target.

geo::AddPacked

Creates a packed primitive that contains the given geometry.

geo::ArrayAttribValue

Returns the values of an array attribute.

geo::AttribIntersectPoints

geo::DetailAttribValue

Returns the value of a detail attribute.

geo::DisplacePoints

geo::DragPoints

geo::ExtractPackedGeo

Returns the geometry embedded in a packed primitive.

geo::FindPointAttribValue

Finds all points in a geometry with a given attribute value.

geo::FindPrimAttribValue

Finds all primitives in a geometry with a given attribute value.

geo::FindVertexAttribValue

Finds all vertices in a geometry with a given attribute value.

geo::ForEachPointBegin

Defines the start of a for-each loop that iterates over the points in a geometry.

geo::ForEachPointEnd

Defines the end of a for-each loop that iterates over the points in a geometry.

geo::ForEachPrimBegin

Defines the start of a for-each loop that iterates over the primitives in a geometry.

geo::ForEachPrimEnd

Defines the end of a for-each loop that iterates over the primitives in a geometry.

geo::FromDisk

Returns a geometry from a geometry file read from disk.

geo::GlobPoints

Returns an array of points based on a pattern.

geo::GlobPrims

Returns an array of primitives based on a pattern.

geo::InitIntersectCache

Computes an intersection cache for a geometry.

geo::Intersect

Determines the intersection point of a ray with an intersection cache.

geo::IntersectPoints

geo::Lattice

Deforms geometry based on the reshaping of a control lattice.

geo::Merge

Merges the points and primitives from other geometry objects into this geometry.

geo::MergePacked

Packs each input and merges them together into a single geometry.

geo::NumPoints

Returns the number of points in a geometry.

geo::NumPrims

Returns the number of primitives in a geometry.

geo::PointAttribValue

Returns the value of a point attribute.

geo::PointPrims

Returns all the primitives that contain a given point.

geo::PrimAttribValue

Returns the value of a primitive attribute.

geo::PrimPoints

Returns all the points on a given primitive.

geo::Replace

Replaces the contents of a geometry object with another geometry object.

geo::SetAgentTransforms

Overrides the transforms of an agent primitive.

geo::SetDetailAttribValue

Sets a detail attribute value on a geometry.

geo::SetPointAttribValue

Sets a point attribute value on a geometry.

geo::SetPointAttribValues

Sets the value of a given attribute on all the points in a geometry.

geo::SetPointAttribValuesByName

Sets the value of an attribute on the points that match a second attribute name.

geo::SetPrimAttribValue

Sets a primitive attribute value on a geometry.

geo::SetPrimAttribValues

Sets the value of a given attribute on all the primitives in a geometry.

geo::SetPrimAttribValuesByName

Sets the value of an attribute on the primitives that match a second attribute name.

geo::SetVertexAttribValue

Sets a vertex attribute value on a geometry.

geo::SetVertexAttribValues

Sets the value of a given attribute on all the vertices in a geometry.

geo::SetVertexAttribValuesByName

Sets the value of an attribute on the vertices that match a given name.

geo::SmoothPoints

geo::Transform

Transforms a geometry using a transformation matrix.

geo::UpdatePackedGeo

Embeds a geometry into a packed primitive, replacing the primitive’s contents.

geo::VertexAttribValue

Returns the value of a vertex attribute.

graph::AddNode

Adds a node to an APEX graph.

graph::AddNodeToSubnet

Adds a node to the subnet of an APEX graph.

graph::AddOrUpdateNode

Adds or updates a node.

graph::AddSubnet

Adds a subnet node to an APEX graph, and sets the contents of the subnet.

graph::AddWirePath

Connects two APEX node ports together by adding a series of wires.

graph::Compile

Compiles a graph and reports execution errors.

graph::ConnectInput

Connects two APEX node ports together by adding a wire.

graph::DefaultParms

Gets the default parameters of an APEX graph.

graph::DeleteNode

Deletes a node from an APEX graph.

graph::DeleteNodes

Deletes a set of nodes from an APEX graph.

graph::DuplicateNode

Duplicates the input node.

graph::EvaluateOutputs

Evaluates outputs from an APEX graph.

graph::FindAndConnectInput

Connects two APEX node ports together.

graph::FindFirstNode

Returns the first matched node in an APEX graph based on a pattern.

graph::FindFirstPort

Returns the first matched port in an APEX graph based on a pattern.

graph::FindNode

Finds a node in an APEX graph based on a node path.

graph::FindNodeInput

Finds an input port on an APEX node.

graph::FindNodeOutput

Finds an output port on an APEX node.

graph::FindNodeTags

Finds the tags of a node based on a pattern.

graph::FindNodes

Finds an array of node IDs in an APEX graph based on a pattern.

graph::FindOrAddNode

Finds or adds a node to an APEX graph.

graph::FindOrAddPort

Finds or adds a port or subport on an APEX node based on a port name.

graph::FindPort

Finds a port on an APEX node based on a port name.

graph::FindPorts

Finds the ports in an APEX graph based on a pattern.

graph::GetConnectedNodes

Finds all APEX nodes that have a direct wire connection to a given port.

graph::GetConnectedPort

Finds the port that is connected to a given port.

graph::GetConnectedPorts

Finds all ports that have a direct wire connection to a given port.

graph::GetPromotedPort

Finds the promoted graph input or output port that is connected to a given port.

graph::GetSubPort

Finds or adds a subport to a variadic port.

graph::GetSubnetContents

Gets the contents of an APEX subnet node.

graph::GraphInputs

Finds all the top-level parameter input ports of an APEX graph.

graph::GraphOutputs

Finds all the top-level output ports of an APEX graph.

graph::HasNodeTag

Checks if a tag exists on a node.

graph::HasNodeTags

Checks if multiple tags exist on a node.

graph::Invoke

Invokes an APEX graph.

graph::IsConnected

Determines whether an input port to a subgraph or subnet is connected.

graph::Layout

Creates a default positional layout of a selection of APEX nodes.

graph::LoadFromGeo

Loads an APEX graph from geometry.

graph::Merge

Merges the contents of an APEX graph into an existing graph.

graph::NodeData

Retrieves the data for a node in an APEX graph.

graph::NodeInputs

Finds all the input ports on an APEX node.

graph::NodeOutputs

Finds all the output ports on an APEX node.

graph::PackSubnet

Packs an array of APEX nodes into a subnet.

graph::ParentNodes

Parents two nodes in a graph.

graph::PortData

Retrieves the data for a port in an APEX graph.

graph::PortNode

Gets the node on which a port exists in an APEX graph.

graph::PromoteInput

Promotes an input port on a node to be an APEX graph input.

graph::PromoteNodeInput

Promotes an input port to the graph’s parms node.

graph::PromoteNodeInputs

Promotes multiple input ports to the graph’s parms node.

graph::PromoteNodeOutput

Promotes an output port to the graph’s output node.

graph::PromoteNodeOutputs

Promotes multiple output ports to the graph’s output node.

graph::PromoteOutput

Promotes an output port on a node to be an APEX graph output.

graph::PromotePort

Promotes a port to the graph’s parms or output node.

graph::Properties

Gets the properties of an APEX graph.

graph::ReplaceNodeTag

Finds and replaces a tag on a node.

graph::RewireOutputs

Rewires the output ports on a node in an APEX graph.

graph::SetDefaultParms

Updates the entries of the default parameter dictionary for an APEX Graph

graph::SetProperties

Updates the entries of the properties dictionary for an APEX Graph

graph::SetSubnetContents

Sets the contents of a subnet in an APEX graph.

graph::Sort

Sorts an APEX graph.

graph::Template

Compiles its internal subnetwork and outputs it as an APEX graph handle object.

graph::UnpackSubnet

Unpacks a subnet in an APEX graph.

graph::UpdateControls

graph::UpdateNode

Updates a node in an APEX graph.

graph::UpdateNodeParms

Updates the parameters on a node in an APEX graph.

graph::UpdateNodeProperties

Updates the properties of a node in an APEX graph.

graph::UpdateNodeTags

Updates the tags on a node in an APEX graph.

graph::WriteToGeo

Writes an APEX graph to geometry.

graphutils::NodeAncestors

graphutils::NodeCallbackName

graphutils::NodeName

graphutils::NodeParent

graphutils::NodeParms

graphutils::NodePath

Gets the path for a node ID in an APEX graph.

graphutils::NodeProperties

graphutils::NodeTags

graphutils::PortPath

Gets the path for a port ID in an APEX graph.

guide::AddSetPointTransforms

Adds a skel::SetPointTransforms node to the graph.

guide::ControlsFromGuides

Adds or updates the TransformObject nodes for the joints in a guide skeleton.

guide::FindOrAddGuide

Finds or adds guide geometry.

guide::SetGuideProperties

Sets the properties metadata on the guide joints.

guide::UpdatePatternFromGuides

Creates string patterns from skeleton joint names or a string array.

guide::UpdateShapesFromGuides

Sets shape data on TransformObjects.

quaternion::Distance

Finds the distance between two quaternions.

quaternion::FromAxisAngle

Creates a unit quaternion from an angle and an axis.

quaternion::FromEuler

Creates a unit quaternion from a set of Euler angles.

quaternion::FromMatrix

Converts a rotation matrix into a unit quaternion.

quaternion::Invert

Inverts a quaternion.

quaternion::Multiply

Multiplies two quaternions.

quaternion::Rotate

Rotates a vector by a quaternion.

quaternion::SwingTwistDecompose

Decomposes a quaternion into a swing and a twist along an axis.

quaternion::SwingTwistInterpolate

Interpolates between two quaternions while interpolating the swing and twist components separately.

quaternion::ToAxisAngle

Converts a quaternion to an axis vector and an angle.

quaternion::ToEuler

Creates a set of Euler angles from a quaternion.

quaternion::ToMatrix

Converts a quaternion to a rotation or transformation matrix.

ragdoll::Solve

Applies a ragdoll simulation to one or more characters.

rig::CombineParmTransform

Combines an input transform matrix and a set of translation, rotation, and scale parameters into a new transform.

rig::ControlSpline

Creates a spline of a given order using a list of CVs.

rig::ControlSplineFromArray

Creates a spline of a given order using an array of CVs.

rig::CurveConstraint

Outputs a transform matrix derived from a location on a curve primitive.

rig::CurveIK

rig::ExtractLocalTransform

Extracts a local transform given a child and parent transform, taking scale inheritance rules into account.

rig::ExtractParmTransform

rig::FkTransform

rig::MultiBoneIK

Positions and orients joints from a root position, goal, and twist position using inverse kinematics.

rig::MultiBoneIKFromArray

Positions and orients joints from a root position, goal, and twist position using inverse kinematics, with inputs and outputs given as arrays.

rig::ParentBlend

rig::PointConstraint

Computes a transform from a weighted mix of points on a geometry.

rig::PoseWeightInterpolation

rig::RBFInterpolation

Performs radial basis function (RBF) interpolation.

rig::SampleSplineTransforms

Samples a variable number of transforms from a spline.

rig::SampleSplineTransformsToArray

Samples a given number of transforms from a spline.

rig::SplineInterpolateTransforms

Generates and samples a spline.

rig::SplineInterpolateTransformsArray

Generates and samples a spline.

rig::TwoBoneIK

rig::UVConstraint

sim::CreateObject

Adds a new dynamics object to a simulation.

sim::CreateRelationship

Adds a new dynamics relationship to a simulation.

sim::CreateSubData

Attaches data to a simulation object or relationship.

sim::EvaluateAtTime

Returns the geometry from a simulation at a specified time.

sim::FindObject

Finds the unique ID of a simulation object by name.

sim::FindRelationship

Finds the unique ID of a simulation relationship by name.

sim::GetGeometry

Returns the geometry from a simulation object or a relationship’s subdata.

sim::LoadSimFile

Loads a simulation state from a file.

sim::RemoveObject

Removes an object from a simulation.

sim::RemoveRelationship

Removes a relationship from a simulation.

sim::SetGeometry

Modifies the geometry subdata for a simulation object or relationship.

sim::SimEngine

Creates a new dynamics simulation.

skel::AddJoint

Creates a new KineFX point on a geometry.

skel::DeleteJoint

Deletes a KineFX point from a geometry.

skel::DeleteJoints

Deletes a group of KineFX points from a geometry.

skel::EvaluateMotionClipArray

Evaluates a single pose from multiple MotionClips.

skel::FindJoint

Finds a KineFX point by its name attribute.

skel::FindRoots

Finds all the KineFX points that do not have a parent.

skel::GetAncestors

Finds all the ancestors of a KineFX point.

skel::GetChildren

Finds all the children of a KineFX point.

skel::GetDescendants

Finds all the descendants of a KineFX point.

skel::GetParent

Finds the parent of a KineFX point.

skel::GetPointLocalTransform

Returns the local transform attribute value of a KineFX point.

skel::GetPointTransform

Returns the world transform of a KineFX point.

skel::GetPointTransforms

Returns the world transforms of multiple KineFX points.

skel::SetParent

Sets a new parent for a KineFX point.

skel::SetParents

Sets new parents for multiple KineFX points.

skel::SetPointTransforms

Sets the world transforms of multiple KineFX points.

skel::SetPointTransformsFromAgent

Sets the world transforms of multiple KineFX points from an agent.

skel::Sort

Sorts the KineFX points in a geometry based on its hierarchy.

skel::Traverse

Traverses the whole KineFX hierarchy and writes out the result.

skel::UpdateJoint

Updates the attribute values of a KineFX point.

string::CamelCase

Converts a string to CamelCase style.

string::Find

Finds the first occurrence of a substring.

string::Format

Creates a formatted string from input values.

string::FromInteger

Converts an integer to string.

string::FromRamp

Converts a ramp to a string.

string::Length

Computes the length of a string.

string::Lower

Converts a string to all lowercase.

string::PatternRename

Performs pattern replacement in a string.

string::Replace

Performs substring replacement in a string.

string::Split

Splits a string into multiple tokens.

string::ToRamp

Converts a string to a ramp.

string::Upper

Converts a string to all uppercase.

transform::Blend

Blends between two matrices.

transform::Build

transform::Determinant

transform::Dihedral

transform::Explode

transform::LookAt

Rotates a matrix’s local look at axis toward a target.

transform::MultiBlend

Blends multiple matrices or quaternions using a set of weights.

transform::MultiBlendFromArray

Blends an array of matrices or quaternions using an array of weights.

transform::PolarDecompose

transform::Prerotate

Applies a prerotation to the given matrix.

transform::Prescale

Prescales the given matrix in three directions simultaneously by the components of a vector.

transform::Pretranslate

Pretranslates a matrix by a vector.

transform::Rotate

Applies a rotation to the given matrix.

transform::RotateAboutAxis

transform::Scale

Scales the given matrix in three directions simultaneously by the components of a vector.

transform::Slerp

Performs spherical linear interpolation.

transform::SmoothRotation

transform::Translate

Translates a matrix by a vector.

On this page	Inputs Outputs
Since	20.0

rig::ParentBlend

Inputs ¶

Outputs ¶

APEX Nodes